Cheap Sale Here

Reader's Comments

1. Sunny Bee | June 15th, 2010 at 2:10 am

   This is a nice looking, functional nightstand if you are on a budget. A few words of caution, the assembly, though easy on the customer, it can take some time the first time (more than 20 min perhaps). You’ll need a Phillips screwdriver. Also, the bottom panel for the drawer is really made of cheap material, it does not look like wood but rather cardboard, I actually thought it was part of the packing material as it did look nothing like the rest of the pieces. This is not a big deal though, since this piece cannot be seen and it is sturdy enough for the bottom of a drawer.
   Rating: 5 / 5

2. J. Gottschalk | June 15th, 2010 at 3:14 am

   From a distance, this table is very functional and nice looking. However, be prepared for some surface imperfections. My table was black and had 15-20 blemishes that appeared to be covered with black magic marker. It also had some knicks and spots that looked like dried glue that were painted over.
   
   On the plus side, it took about 15 minutes to assemble with the included allen wrench, and even came with wood plugs to cover the screw holes. Not bad, for the money!
   Rating: 3 / 5

3. Sandridge | June 15th, 2010 at 3:45 am

   Given the fact that these tables run about half the price of many (many!) other nightstands I have looked at, I’m pretty happy overall with the look and quality of the piece. It’s easier to build with two people, but can be done with one person, although if you have an allen key set, that’s easier to use than just the single one they provide. It looks very good once it’s built (just like the picture, and it looks real, not like cheap laminate), but if you set it on a wood floor, you may get some wobble. I don’t know if it’s my floor or the table, but a little pad underneath one of the legs should fix it. The only other problem is that the drawer only slides on one set of rails (at the bottom), so if you pull it out too far, it tends to drop down a bit… not to the point where it falls out, but it doesn’t stay level. Other than that, it’s a great table for the money.
   Rating: 4 / 5

4. dill | June 15th, 2010 at 6:13 am

   I was looking for a couple of tables for bedside–something inexpensive, sturdy, and decent enough. Between a sale,an Amazon rewards certificate, and super saver shipping, I got two for under $40. They were very easy to assemble. I put them both together in 30 minutes with the assistance of my 6 year old. One went together with complete ease. The other required a little manipulation of the drawer bottom, but was solved in a few minutes without the need for additional tools. They seems to be sturdy and good looking, with minor imperfections in the finish quality–but these are not glaring imperfections. I’m very satisfied.
   Rating: 4 / 5

5. E. D. Head | June 15th, 2010 at 6:46 am

   We recently got two lamps and needed a couple of inexpensive tables. These fit the bill. The first one went together without a hitch. When I pulled out the second one I noticed they had mis-packaged and given me 3 drawer sides and no back. Since I have the tools I just cut one side down to 12 inches and continued putting it together. They look great under the lamps.

   For someone without the tools this could have been a problem. The finish on mine was nice and aside from the above I like the product.
   Rating: 4 / 5